Canon PowerShot G15 Page 127 User Manual Download

Page: 127 / 316

127

Image Brightness (Exposure Compensation)

Still Images

Changing the Metering Method

Adjust the metering method (how brightness is measured) to suit shooting

conditions as follows.

Press the <

> button, choose the

desired option (either press the <

buttons or turn the <

> dial), and then

press the <

> button again.

The option you configured is now

displayed.

Evaluative

For typical shooting conditions, including backlit shots.

Automatically adjusts exposure to match the shooting conditions.

Center

Weighted Avg.

Determines the average brightness of light across the entire

image area, calculated by treating brightness in the central area

as more important.

Spot

Metering restricted to within the [

] (Spot AE Point frame).

You can also link the Spot AE Point frame to the AF frame (see

below).

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands