Canon PowerShot G15 User Manual Download Page 102

Page: 102 / 316

102

Image Effects (Creative Filters)

Still Images

Movies

Shooting with Faded Colors (Nostalgic)

This effect makes colors look faded and images look weathered, as in old

photographs. Choose from five effect levels.

Choose [ ].

Follow steps 1 – 2 on

99 and

choose [ ].

Choose an effect level.

Turn the <

> dial to choose an effect

level.

A preview is shown of how your shot will

look with the effect applied.

Shoot.

•

Try taking some test shots first, to make sure you obtain the

desired results.

•

Colors will look faded on the shooting screen, but the image aging effect is

not shown. Review the image in Playback mode to see the effect (

174).

•

The image aging effect is not shown in movies.

COP

Summary of Contents for PowerShot G15





























































































































































































































































































































Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands

Canon PowerShot G15, User Manual

Search results

Summary of Contents for PowerShot G15

Reviews:

Related manuals for PowerShot G15

Brands by name

Popular brands