Using the Self-Timer
57
Choose
Q
.
●
Press the
op
buttons or turn the
Ê
dial
to choose
Q
. Immediately turn the
÷
dial
to choose a delay time, then press the
qr
buttons to choose the number of shots,
and press
m
button.
X
Once set,
Q
will appear on the screen.
Shoot.
●
Press the shutter button halfway to focus
on the subject, then press it fully.
X
When the self-timer starts, the lamp blinks
and the self-timer sound plays.
●
To cancel shooting with the timer after
countdown has started, press the
p
button.
●
To restore the original setting, choose
in Step 2.
What if the number of shots is set to two or more shots?
•
Exposure and white balance settings are set with the first shot.
•
If the flash fires or you set a high number of shots, the shooting interval may take
longer than usual.
•
If the memory card becomes full, shooting stops automatically.
When you set the time delay for more than 2 seconds, the self-timer lamp
and sound speed up 2 seconds before the shutter releases (when the flash
will fire, the lamp lights).
COP
Y
