172
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wireless Features
Setting Menu
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
z
Choose [Electronic level] on the [ 1] tab,
and then press the [ ] button.
z
Choose [Reset], and then press the [ ]
button.
z
Choose [OK], and then press the [ ]
button.
Switching the Color of Screen Information
Still Images
Movies
Information displayed on the screen and menus can be changed to a color
suitable for shooting under low-light conditions. Enabling this setting is
useful in modes such as [ ] (
z
Choose [Night Display] on the [ 2] tab,
and then choose [On] (
z
To restore the original display, choose
[Off].
●
You can also return the setting to [Off] by holding down the [ ]
button for at least one second.
Changing the Video System
Set the video system of any television used for display. This setting
determines the image quality (frame rate) available for movies.
z
Choose [Video system] on the [ 1] tab,
and then choose an option.
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
For greater calibration accuracy, display grid lines (
level the camera in advance.
1
Make sure the camera is level.
z
Place the camera on a flat surface, such
as a table.
2
Calibrate the electronic level.
z
Choose [Electronic level] on the [ 1] tab,
and then press the [ ] button.
z
To adjust left/right tilt, choose [Horizontal
Roll Calibration], and to adjust forward/
backward tilt, choose [Vertical Pitch
Calibration], followed by the [ ] button. A
confirmation message is displayed.
z
Choose [OK], and then press the [ ]
button.
