manualshive.com logo in svg

Canon PowerShot ELPH 530 HS, User Manual

Share
Download
Canon PowerShot ELPH 530 HS User Manual Download Page 185

Using an Eye-Fi Card

185

Check the access point SSID used by the Eye-Fi card or the connection 
status, as needed.

z

Touch 

H

, touch 

n

, and then touch 

[Eye-Fi Settings] on the 

3

 tab to choose it.

z

Touch [Connection info].

X

The connection information screen is 
displayed.

Configure the setting as follows to disable Eye-Fi transfer by the card, if 
necessary.

Choose [Disable] in [Eye-Fi trans.].

z

Touch 

H

, touch 

n

, and then touch 

[Eye-Fi Settings] on the 

3

 tab to choose it.

z

Choose [Eye-Fi trans.], and then choose 
[Disable].

•

Power saving (p. 38) on the camera is temporarily disabled during image 
transfer.

•

Choosing 

 mode will interrupt the Eye-Fi connection. Although the Eye-Fi 

connection will be restored after you choose another shooting mode or enter 
Playback mode, the camera may transfer any movies made in 

 mode again.

Checking Connection Information

Disabling Eye-Fi Transfer

•

[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the camera 
with its write-protect tab in the unlocked position. For this reason, you 
cannot change settings for an inserted Eye-Fi card if the write-protect 
tab is in the locked position.

COP

Y

Summary of Contents for PowerShot ELPH 530 HS























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands