Canon PowerShot ELPH 530 HS User Manual Download Page 123

Page: 123 / 214

Viewing

123

Play movies.

Touch

to start playback.

Adjust the volume.

Scroll up or down to adjust the volume.

Pause playback.

To pause playback, touch the screen. The
movie control panel is displayed. To resume
playback, touch

After the movie is finished,

is displayed.

To switch images during image display, you can tap the camera gently on the
side, as shown below.

•

To switch to Shooting mode from Playback mode, press the shutter button
halfway.

•

To deactivate Scroll Display, touch

, touch

, choose [Scroll

Display] on the

tab, and then touch

to choose [Off].

•

For playback from the last image viewed, touch

, touch

, choose

[Resume] on the

tab, and then choose [Last seen].

•

To change the transition shown between images, touch

, touch

choose [Transition] on the

tab, and then touch

to choose the effect.

Active Display

Still Images

Movies

Switch to next image

Switch to previous image

COP

Summary of Contents for PowerShot ELPH 530 HS























































































































































































































Search results

Summary of Contents for PowerShot ELPH 530 HS

Reviews:

Related manuals for PowerShot ELPH 530 HS

Brands by name

Popular brands

Canon PowerShot ELPH 530 HS, User Manual

Search results

Summary of Contents for PowerShot ELPH 530 HS

Reviews:

Related manuals for PowerShot ELPH 530 HS

Brands by name

Popular brands