Canon PowerShot ELPH 530 HS User Manual Download Page 119

Page: 119 / 214

Other Settings

119

Access the setting screen.

Touch

, touch

, and then touch

[IS Settings] on the

tab to choose it

(p. 42).

Configure the setting.

Choose [IS Mode], and then choose the
desired option (p. 42).

*The setting is changed to [Continuous] for movie

recording.

Changing the IS Mode Settings

Still Images

Movies

Continuous

Optimal image stabilization for the
shooting conditions is automatically
applied (Intelligent IS) (p. 52).

Shoot Only*

Image stabilization is active only at the
moment of shooting.

Off

Deactivates image stabilization.

•

If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this case,
set [IS Mode] to [Off].

COP

Summary of Contents for PowerShot ELPH 530 HS























































































































































































































Search results

Summary of Contents for PowerShot ELPH 530 HS

Reviews:

Canon PowerShot ELPH 530 HS, User Manual, Page: 119 / 214

Search results

Summary of Contents for PowerShot ELPH 530 HS

Reviews: