Canon PowerShot D30 Page 16 User Manual Download

Page: 16 / 153

Before Use

Basic Guide

Advanced Guide

Camera Basics

Using GPS
Functions

Auto Mode

Other Shooting
Modes

P Mode

Playback Mode

Setting Menu

Accessories

Appendix

Index

Before Use

Basic Guide

Advanced Guide

Camera Basics

Using GPS
Functions

Auto Mode

Other Shooting
Modes

P Mode

Playback Mode

Setting Menu

Accessories

Appendix

Index

Set the date and time.

Press the <

> buttons to choose an

option.

Press the <

> buttons to specify

the date and time.

When finished, press the <

> button.

Set the home time zone.

Press the <

> buttons to choose

your home time zone.

Finish the setup process.

Press the <

> button when finished.

After a confirmation message, the setting

screen is no longer displayed.

To turn off the camera, press the power
button.

•

Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.

•

To set daylight saving time (1 hour ahead), choose [

] in step 2 and then

choose [

] by pressing the <

> buttons.

Changing the Date and Time

Adjust the date and time as follows.

Access the camera menu.

Press the <

> button.

Choose [Date/Time].

Press the zoom button to choose the [

]

tab.

Press the <

> buttons to choose

[Date/Time], and then press the <

button.

Change the date and time.

Follow step 2 in “Setting the Date and
Time” (

) to adjust the settings.

Press the <

> button to close the

menu.

Summary of Contents for PowerShot D30


























































































































































Search results

Summary of Contents for PowerShot D30

Reviews:

Related manuals for PowerShot D30

Brands by name

Popular brands

Canon PowerShot D30, User Manual

Search results

Summary of Contents for PowerShot D30

Reviews:

Related manuals for PowerShot D30

Brands by name

Popular brands