Canon PowerShot D30, User Manual

Page: 135 / 153

Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
135
Before Use
Basic Guide
Advanced Guide
Camera Basics
Using GPS
Functions
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Sound is not played during movies.
•
Adjust the volume (
=
80 ) if you have activated [Mute] (
=
104 ) or the sound in
the movie is faint.
•
No sound is played for movies shot in [ ] (
=
55 ) or [ ] (
=
64 ) mode
because audio is not recorded in these modes.
Memory Card
The memory card is not recognized.
•
Restart the camera, with the memory card in it (
=
23 ).
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
•
Press the <
1
> button to enter Playback mode. Hold the <
n
> button down as
you press the <
o
> and <
m
> buttons at the same time. On the next screen, press
the <
q
><
r
> buttons to choose [B], and then press the <
m
> button.
Eye-Fi Cards
Cannot transfer images ( =
130
).
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
•
The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (
=
14 ).
Memory card locked
•
The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (
=
14 ).
Cannot record!
•
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (
=
14 ).
Memory card error ( =
107
)
•
If the same error message is displayed even after you have formatted a supported
memory card (
=
2 ) and have inserted it facing the correct way (
=
14 ), contact
a Canon Customer Support Help Desk.
Insufficient space on card
•
There is not enough free space on the memory card to shoot (
=
35 , 50 , 66 ) or edit
images (
=
97 – 101 ). Either erase unneeded images (
=
90 ) or insert a memory card
with enough free space (
=
14 ).
Change the battery pack. ( =
14
)
No Image.
•
The memory card does not contain any images that can be displayed.
Protected! ( =
87
)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back AVI/RAW
•
Unsupported or corrupt images cannot be displayed.
•
It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.