Canon PowerShot A720 IS, User Manual, Page: 153 / 211

Troubleshooting
151
AF-assist Beam is set to
[Off]. z In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 45). Take care not to obstruct
the AF-assist Beam with your hand
when used.
Subject is out of focal range. z Shoot with the subject at the correct
focusing distance (p. 185).
z The camera may be set to an
unintended function (such as Macro
or Manual Focus mode). Cancel the
setting.
The subject is hard to focus
on. z Use the focus lock, AF lock or manual
focus to shoot (p. 94).
Subject in recorded image is too dark.
Insufficient light for shooting. z Set the flash to (Flash on) (p. 64).
The subject is
underexposed because the
surroundings are too bright. z Set the exposure compensation to a
positive (+) setting (p. 101).
z Use the AE Lock or spot metering
functions (pp. 98, 102).
Subject is too far away for
flash to reach. z Shoot with the subject within the
correct flash range when using the
built-in flash (p. 186).
z Raise the ISO speed and then shoot
(p. 100).
Subject in recorded image is too bright, or image
flashes white.
Subject is too close, making
the flash too strong. z Shoot with the subject within the
correct flash range when using the
built-in flash (p. 186).
z Set the Safety FE to [On] (p. 113).
The subject is overexposed
because the surroundings
are too dark. z Set the exposure compensation to a
negative (–) setting (p. 101).
z Use the AE Lock or spot metering
functions (pp. 98, 102).
Downloaded From camera-usermanual.com Canon Manuals