Canon PowerShot A4050 IS Page 99 User Manual Download

Page: 99 / 186

Shooting Range and Focusing

Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.

Press the

button, choose [AF Frame]

on the

tab, and then choose the desired

option (p. 51).

•

Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance (

only).

•

After you aim the camera at the subject, a white frame is displayed around
the person’s face determined by the camera to be the main subject, and up
to two gray frames are displayed around other detected faces.

•

When the camera detects movement, frames will follow moving subjects,
within a certain range.

•

After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.

•

With the AF frame mode set to [Face AiAF], using Touch Shutter or
Touch AF returns the camera to

Changing the AF Frame Mode

A3400 IS

Still Images

Movies

Face AiAF

Still Images

Movies

Summary of Contents for PowerShot A4050 IS



























































































































































































Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands

Canon PowerShot A4050 IS, User Manual

Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands