Canon PowerShot A4050 IS Page 75 User Manual Download

Page: 75 / 186

Specific Scenes

Shoot under low light (Low Light)

Shoot with minimal camera shake and
subject blur even in low-light conditions.

Shoot with snowy backgrounds
(Snow)

Bright, natural-colored shots of people
against snowy backgrounds.

Shoot fireworks (Fireworks)

Vivid shots of fireworks.

Discreet mode

Shoot without activating camera sounds, the
flash, or lamp. Use this mode where camera
sounds, the flash, and lights are prohibited.

Still Images

Movies

Still Images

Movies

Still Images

Movies

•

mode, mount the camera on a tripod or take other measures to

keep it still and prevent camera shake.

Set [IS Mode] to [Off] when using a tripod or other means to hold the
camera still (p. 110).

•

mode resolution is

(2304 x 1728) and cannot be changed.

•

mode, even playback sounds are muted. Sounds of camera operations

are muted, and movie audio is also muted.

A4000 IS A3400 IS A2400 IS

Summary of Contents for PowerShot A4050 IS



























































































































































































Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands

Canon PowerShot A4050 IS, User Manual

Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands