Canon PowerShot A4050 IS Page 62 User Manual Download

Page: 62 / 186

When distant subjects are too far away to enlarge using the optical zoom, use
digital zoom for enlargement up to the following zoom factors.

Up to approx. 32x

Up to approx. 20x

Move the zoom lever toward

Hold the lever until zooming stops.

Zooming stops at the largest possible zoom
factor (before the image becomes grainy),
which is displayed when you release the
zoom lever.

Move the zoom lever toward

again.

The camera zooms in even closer on the
subject, using digital zoom.

Common, Convenient Features

Zooming in Closer on Subjects (Digital Zoom)

Still Images

Movies

A4000 IS
A3400 IS A2400 IS

A2300

A1300

A810

Zoom Factor

•

Zoomed images may look grainy, under some resolution settings
(p. 68) and zoom factors. In this case, the zoom factor is shown in
blue.

•

Focal length when optical and digital zoom are combined is as follows (35mm
film equivalent).

28 – 896 mm (28 – 224 mm with optical zoom alone)

28 – 560 mm (28 – 140 mm with optical zoom alone)

A4000 IS

A3400 IS A2400 IS

A2300

A1300

A810

Summary of Contents for PowerShot A4050 IS



























































































































































































Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands

Canon PowerShot A4050 IS, User Manual

Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands