Canon PowerShot A4050 IS Page 19 User Manual Download

Page: 19 / 186

Initial Preparations

Insert the included batteries.

Open the cover.

Slide the cover (

) and open it (

Insert the batteries.

Insert the batteries as shown.

Close the cover.

Lower the cover (

) and hold it down as you

slide it until it clicks into the closed position
(

Use AA alkaline batteries or Canon AA NiMH batteries (sold separately,
p. 141).

Inserting the Batteries

A1300

A810

Compatible Batteries

•

Due to the inconsistent performance of other batteries, use of specified batteries
only is recommended.

•

NiMH batteries last longer in cameras than alkaline batteries do, especially in
cold weather.

Summary of Contents for PowerShot A4050 IS



























































































































































































Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands

Canon PowerShot A4050 IS, User Manual

Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands