Canon PowerShot A4050 IS Page 107 User Manual Download

Page: 107 / 186

Flash

107

Just as with the AE lock (p. 91), you can lock the exposure for the flash shots.

Set the flash to

(p. 106).

Lock the flash exposure.

Aim the camera at the subject to shoot with
the exposure locked. With the shutter button
pressed halfway, press the

button.

The flash fires, and when

(

is displayed, the

flash output level is retained.

To unlock FE, release the shutter button and
press the

button again. In this case,

(

no longer displayed.

Compose the shot and shoot.

Shooting with the FE Lock

•

Cannot be used with Touch Shutter (p. 65).

•

FE: Flash Exposure

•

Just as with AE lock (p. 91), you can lock the flash exposure by touching the
bottom of the screen.

A3400 IS

Summary of Contents for PowerShot A4050 IS



























































































































































































Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands

Canon PowerShot A4050 IS, User Manual

Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands