Canon PowerShot A4050 IS Page 121 User Manual Download

Page: 121 / 186

121

Protect important images to prevent accidental erasure by the camera
(p. 122).

Choose [Protect].

Press the

button, and then choose

[Protect] on the

tab (p. 51).

Choose an image.

Press the

buttons to choose an image,

and then press the

button.

displayed.

To cancel protection, press the

button

again.

is no longer displayed.

Repeat this process to choose additional
images.

Protect the image.

Press the

button. A confirmation

message is displayed.

Press the

buttons to choose [OK], and

then press the

button.

Protecting Images

Still Images

Movies

•

Protected images on a memory card will be erased if you format the
card (pp. 132, 133).

•

Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.

•

Protected images cannot be erased by the camera. To erase them, cancel
protection settings first.

Summary of Contents for PowerShot A4050 IS



























































































































































































Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands

Canon PowerShot A4050 IS, User Manual

Search results

Summary of Contents for PowerShot A4050 IS

Reviews:

Related manuals for PowerShot A4050 IS

Brands by name

Popular brands