background image

89

Editing 

You can trim the beginnings and ends of recorded movies in one-second 
increments.

1

Choose 

*

.

Follow Steps 1 – 3 on 

p. 33

, choose 

*

 and 

press the 

m

 button.

X

The movie editing panel and the movie 
editing bar will appear on the screen.

2

Set the editing range.

Press the 

op

 buttons and choose 

 or 

.

Press the 

qr

 buttons to move  . 

 will 

display at each one-second interval. If you 
choose 

, you can trim the beginning of 

the movie from 

. If you choose 

, you 

can trim the end of the movie from 

.

X

Even if you move   to a point other than a 

 point, only the portion from the nearest 
 to the left will be trimmed when 

 is 

chosen. Only the portion from the nearest 

 to the right will be trimmed when 

 is 

chosen.

X

The section indicated with   will be the 
section of the movie that remains after 
editing.

3

Check the edited movie.

Press the 

op

 buttons to choose 

 

(Play), then press the 

m

 button. The edited 

movie will play.

To edit the movie again, repeat Step 2.

To cancel editing, press the 

op

 buttons, 

and choose 

Ú

. After pressing the 

m

 

button, press the 

qr

 buttons to choose 

[OK], and press the 

m

 button again.

Movie Editing Bar

Movie Editing Panel

Summary of Contents for PowerShot A3150 IS




















































































































































Reviews: