Canon Power Shot G7X User Manual Download Page 441

Page: 441 / 458

441

Contents

Number of Shots/Recording Time, Playback Time

Number of Shots

Approx. 210

Number of Shots (Eco Mode On)

Approx. 310

Movie Recording Time*

Approx. 40 minutes

Movie Recording Time
(Continuous Shooting*

)

Approx. 1 hour, 10 minutes

Playback Time

Approx. 4 hours

Time under default camera settings, when normal operations are
performed, such as shooting, pausing, turning the camera on and off,
and zooming.

Time available when shooting the maximum movie length (until
recording stops automatically) repeatedly.

●

The number of shots that can be taken is based on
measurement guidelines of the Camera & Imaging Products
Association (CIPA).

●

Under some shooting conditions, the number of shots and
recording time may be less than mentioned above.

●

Number of shots/time with a fully charged battery pack.

Summary of Contents for Power Shot G7X











































































































































































































































































































































































































































































Search results

Summary of Contents for Power Shot G7X

Reviews:

Brands by name

Popular brands

Canon Power Shot G7X, User Manual

Search results

Summary of Contents for Power Shot G7X

Reviews:

Brands by name

Popular brands