Canon Power Shot G7X, User Manual, Page: 346 / 458

346
ç
Contents
●
Low-level formatting takes longer than “Formatting Memory
Cards” (
=
344), because data is erased from all storage regions
of the memory card.
●
You can cancel low-level formatting in progress by choosing
[Stop]. In this case, all data will be erased, but the memory card
can be used normally.
File Numbering
Your shots are automatically numbered in sequential order (0001
– 9999) and saved in folders that store up to 2,000 images each.
You can change how the camera assigns file numbers.
z
Choose [File Numbering], and
then choose an option.
Continuous
Images are numbered consecutively (until the 9999th
shot is taken/saved) even if you switch memory cards.
Auto Reset
Image numbering is reset to 0001 if you switch
memory cards, or when a new folder is created.
●
Regardless of the option selected in this setting, shots may be
numbered consecutively after the last number of existing images
on newly inserted memory cards. To start saving shots from 0001,
use an empty (or formatted (
=
344)) memory card.
●
Refer to “Software Instruction Manual” (
=
366) for information
on the card folder structure and image formats.