manualshive.com logo in svg

Canon Power Shot G7X, User Manual

Share
Download
Canon Power Shot G7X User Manual Download Page 340

340

ç

 Contents

2 

Switch to the destination time 
zone.

 

z

Press the [

][

] buttons or turn 

the [

] dial to choose [

 World], 

and then press the [

] 

button.

 

z

[

] is now shown on the shooting 

screen (

=

 402).

 

●

Adjusting the date or time while in [

] mode (

=

 39) will 

automatically update your [

 Home] time and date.

Lens Retraction Timing

The lens is normally retracted for safety about one minute after 
you press the [

] button in Shooting mode (

=

 50). To have 

the lens retracted immediately after you press the [

] button, set 

the retraction timing to [0 sec.].

 

z

Choose [Lens Retraction], and 
then choose [0 sec.].

Summary of Contents for Power Shot G7X











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands