Canon Power Shot G7X Page 258 User Manual Download

Page: 258 / 458

258

Contents

Tagging Images as Favorites

Still Images

Movies

You can organize images by tagging them as favorites. By

choosing a category in filtered playback, you can restrict the

following operations to all of those images.

●

“Viewing” (

222), “V iewing Slideshows” (

244),

“Protecting Images” (

247), “Erasing Images” (

252),

“Adding Images to the Print List (DPOF)” (

379), “Adding

Images to a Photobook” (

385)

Choose [Favorites].

Press the [

] button and

choose [Favorites] on the [

]

tab (

58).

Choose an image.

Press the [ ][ ] buttons or turn
the [

] dial to choose an image,

and then press the [

] button.

[

] is displayed.

To untag the image, press the
[

] button again. [

] is no longer

displayed.

Repeat this process to choose
additional images.

Summary of Contents for Power Shot G7X











































































































































































































































































































































































































































































Search results

Summary of Contents for Power Shot G7X

Reviews:

Related manuals for Power Shot G7X

Brands by name

Popular brands

Canon Power Shot G7X, User Manual

Search results

Summary of Contents for Power Shot G7X

Reviews:

Related manuals for Power Shot G7X

Brands by name

Popular brands