manualshive.com logo in svg

Canon Power Shot G7X, User Manual, Page: 181 / 458

Share
Download
Canon Power Shot G7X User Manual Download Page 181

181

ç

 Contents

Shooting with Servo AF

 Still Images 

 

Movies

This mode helps avoid missing shots of subjects in motion, 
because the camera continues to focus on the subject and adjust 
the exposure as long as you press the shutter button halfway.

1 

Configure the setting.

 

z

Press the [

] button, 

choose [Servo AF] on the 
[

] tab, and then choose [On] 

(

=

 58).

2 

Focus.

 

z

The focus and exposure are 
maintained where the blue AF 
frame is displayed while you 
are pressing the shutter button 
halfway.

 

●

Focusing may not be possible in some shooting conditions.

 

●

In low-light conditions, Servo AF may not be activated (AF frames 
may not turn blue) when you press the shutter button halfway. 
In this case, the focus and exposure are set according to the 

specified AF frame mode.

 

●

If adequate exposure cannot be obtained, shutter speeds and 
aperture values are displayed in orange. Release the shutter 
button, and then press it halfway again.

 

●

AF lock shooting is not available.

 

●

[AF-Point Zoom] on the [

] tab (

=

 58) is not available.

 

●

Not available when using the self-timer (

=

 81).

Summary of Contents for Power Shot G7X











































































































































































































































































































































































































































































Reviews:

No comments