Canon Power Shot G7X User Manual Download Page 102

Page: 102 / 458

102

Contents

Changing Movie Image Quality

Still Images

Movies

4 image quality settings are available. For guidelines on the

maximum movie length at each level of image quality that will fit on

a memory card, see “Recording Time per Memory Card” (

443).

Press the [

] button, choose

[

] in the menu, and choose

the desired option (

56).

The option you configured is now

displayed.

To restore the original setting,
repeat this process but choose
[

Image

Quality

Resolution Frame Rate

Details

1920 x 1080 60 fps

For shooting in Full HD
[

] enables movies with

smoother motion

1920 x 1080 30 fps

1280 x 720

30 fps

For shooting in HD

640 x 480

30 fps

For shooting in standard definition

●

Black bars (displayed on the top and bottom in [

], [

and [

] modes and on the left and right in [

] mode)

indicate image areas not recorded.

Summary of Contents for Power Shot G7X











































































































































































































































































































































































































































































Search results

Summary of Contents for Power Shot G7X

Reviews:

Brands by name

Popular brands

Canon Power Shot G7X, User Manual

Search results

Summary of Contents for Power Shot G7X

Reviews:

Brands by name

Popular brands