Canon Power Shot G7X, User Manual, Page: 400 / 458

400
ç
Contents
Wi-Fi
Connection failed
●
No access points were recognized. Check the access point settings
(
=
296).
●
A device could not be found. Turn the camera off and on again, and retry
the connection.
●
Check the device you want to connect to and make sure it is ready for
connection.
Cannot determine access point
●
The WPS buttons on numerous access points were pressed
simultaneously. Try reconnecting again.
No access points found
●
Check to make sure that the access point is turned on.
●
When connecting to an access point manually, make sure that you
entered the correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
●
Check the access point security settings (
=
296).
IP address conflict
● Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
●
You may be in an environment where Wi-Fi signals are obstructed.
● Avoid using the camera’s Wi-Fi function around microwave ovens,
Bluetooth devices, and other devices that operate on the 2.4 GHz band.
●
Bring the camera closer to the other device you are trying to connect to
(such as the access point), and make sure there are no objects between
the devices.
●
Check the connected device to make sure it is not experiencing errors.