Canon Power Shot G7X Page 36 User Manual Download

Page: 36 / 458

Contents

Close the cover.

Lower the cover (1) and hold it
down as you slide the switch, until
it clicks into the closed position
(2).

●

For guidelines on how many shots or hours of recording can be
saved on one memory card, see “Number of Shots per Memory
Card” (

442).

Removing the Battery Pack and Memory Card

Remove the battery pack.

Open the cover and press the
battery lock in the direction of the
arrow.

The battery pack will pop up.

Remove the memory card.

Push the memory card in until it
clicks, and then slowly release it.

The memory card will pop up.

(1)

(2)

Summary of Contents for Power Shot G7X











































































































































































































































































































































































































































































Search results

Summary of Contents for Power Shot G7X

Reviews:

Related manuals for Power Shot G7X

Brands by name

Popular brands

Canon Power Shot G7X, User Manual

Search results

Summary of Contents for Power Shot G7X

Reviews:

Related manuals for Power Shot G7X

Brands by name

Popular brands