Canon Power Shot G7X, User Manual, Page: 296 / 458

296
ç
Contents
Saving Images to a Connected Computer
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Wi-Fi” (
=
440).
Connection methods vary depending on whether the access point
supports Wi-Fi Protected Setup (WPS,
=
297) or not (
=
302).
For non-WPS access points, check the following information.
●
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called
the “access point name” or “network name”.
●
Network authentication / data encryption (encryption method /
encryption mode)
The method for encrypting data during wireless transmission.
Check which security setting is used: WPA2-PSK (AES),
WPA2-PSK (TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP
(open system authentication), or no security.
●
Password (encryption key / network key)
The key used when encrypting data during wireless
transmission. Also called the “encryption key” or “network key”.
●
Key index (transmit key)
The key set when WEP is used for network authentication /
data encryption. Use “1” as the setting.