Canon Power Shot G7X Page 139 User Manual Download

Page: 139 / 458

139

Contents

Shoot.

Press the shutter button. The

flash fires as the camera takes

the first shot.

The second and third shots are

now taken, without firing the flash.

Have the person stay still
until the lamp blinks.

The person you are shooting
should stay still until the lamp
blinks three times after the third
shot, which may take up to about
two seconds.

All the shots are combined to
create a single image.

●

Under some shooting conditions, images may not look as
expected.

●

For better shots, have the person stand away from illumination

such as street lights, and make sure the flash is raised.

●

There will be a delay before you can shoot again, as the camera
processes the images.

●

To avoid blurry shots, make sure the person you shoot in steps
4 – 5 stays still.

Summary of Contents for Power Shot G7X











































































































































































































































































































































































































































































Search results

Summary of Contents for Power Shot G7X

Reviews:

Related manuals for Power Shot G7X

Brands by name

Popular brands

Canon Power Shot G7X, User Manual

Search results

Summary of Contents for Power Shot G7X

Reviews:

Related manuals for Power Shot G7X

Brands by name

Popular brands