manualshive.com logo in svg

Canon PIXMA TS9010, Online Manual, Page: 430 / 467

Share
Download
Canon PIXMA TS9010 Online Manual Download Page 430

1300

Cause

Paper is jammed when feeding paper from rear tray.

What to Do

If the paper fed from the rear tray is jammed, remove the jammed paper from the paper output slot or from
the rear tray following the instructions below.

1. Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier.

Hold the paper with both hands, and pull it out slowly so as not to tear it.

Note

• If you cannot pull out the paper, turn the printer back on without pulling forcibly. The paper may

be ejected automatically.

• If paper becomes jammed during printing and you need to turn off the printer to remove it, tap

Stop

 to stop the printing before you turn off the printer.

• If the paper tears and you cannot remove the jammed paper from the paper output slot or the

rear tray, remove the paper from inside the printer.

Paper Is Jammed inside Printer

• If you cannot pull the paper out from the paper output slot or from the rear tray, try to pull the

paper out from the rear side of the printer.

Removing Jammed Paper from Rear Side

2. Reload paper and select 

OK

 on printer's touch screen.

The printer resumes printing. Reprint the page you were printing if it was not printed properly due to
the paper jam.

430

Summary of Contents for PIXMA TS9010




















































































































































































































































































































































































































































































Reviews:

No comments