manualshive.com logo in svg

Canon PIXMA TS9010, Online Manual, Page: 257 / 467

Share
Download
Canon PIXMA TS9010 Online Manual Download Page 257

Printing Photo from Memory Card onto Disc Label

You can print a photograph saved on a memory card onto the disc label of the printable disc.

Important

• You cannot print on 3.15 inches / 8 cm printable discs.

• Do not attach the disc tray or place the printable disc until the message asking you to set them is

displayed. Doing so can damage the printer.

1.

Make sure printer is turned on.

2. Select 

 

Print

 on the HOME screen.

Using the Operation Panel

3. Select 

 

From mem. card

.

The memory card print menus are displayed.

4. Select 

 

Print photos to disc label

.

The print area setting screen is displayed.

5.

Insert memory card into card slot.

Note

• When you insert the memory card before you displays the memory card print menus, the photo

selection screen in 

Select photo print

 is displayed.

To display the HOME screen, touch the 

HOME

 button.

• If no printable photo data is saved on the memory card, 

Data of supported types are not saved.

is displayed on the touch screen.

• If more than 2,000 photo data are saved on the memory card, the photo data is split by group per

2,000 photos in reverse chronological order (date last modified) automatically. Check the message
displayed on the touch screen and select 

OK

.

6. Specify print area.

257

Summary of Contents for PIXMA TS9010




















































































































































































































































































































































































































































































Reviews:

No comments