manualshive.com logo in svg

Canon PIXMA TS9010, Online Manual, Page: 163 / 467

Share
Download
Canon PIXMA TS9010 Online Manual Download Page 163

•

LAN setting list

The list of wired LAN settings of this printer is displayed on the touch screen.

Select 

Print details

 and then 

Yes

 to print the list.

Printing Network Settings

Important

• The network settings printout contains important information about your network. Handle it with

care.

The following setting items are displayed. (Some setting items are not displayed depending on the
printer settings.)

Items

Setting

IPv4 address

XXX. XXX. XXX. XXX (12 characters)

IPv4 subnet mask

XXX. XXX. XXX. XXX (12 characters)

IPv4 default gateway

XXX. XXX. XXX. XXX (12 characters)

IPv6 address

XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)

MAC address of wired LAN

XX:XX:XX:XX:XX:XX (12 characters)

Printer name

XXXXXXXXXXXXXXX (up to 15 characters)

Bonjour service name

XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)

Root cert. thumbprint (SHA-1)

XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX

Root cert. thumbprint (SHA-256)

XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

("XX" represents alphanumeric characters.)

Common settings

•

Set printer name

Specifies the printer name. You can use up to 15 characters for the name.

Note

• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.

•

TCP/IP settings

Performs IPv4 or IPv6 setting.

163

Summary of Contents for PIXMA TS9010




















































































































































































































































































































































































































































































Reviews:

No comments