Canon PIXMA TS6200 Series Online Manual Download Page 443

Page: 443 / 464

1003

Cause

Possible causes include the following.

• There is no paper in the cassette.
• Paper is not loaded in the cassette properly.

What to Do

Take the corresponding actions below.

• Load paper in the cassette.
• Align the paper guides with the both edges of the paper when you load paper in the cassette.

• Set paper information for the paper in the cassette.

Loading Paper in the Cassette

After carrying out the above measures, select

on the touch screen.

Note

• Once the cassette is inserted, the screen for setting cassette paper information appears. Set paper

information for the paper in the cassette.

• The loadable paper differs depending on the paper source.

The loadable paper in the cassette is A4, Letter, A5, or B5 size plain paper.

• To cancel printing, press the printer's

Stop

button.

443

Summary of Contents for PIXMA TS6200 Series

















































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TS6200 Series

Reviews:

Canon PIXMA TS6200 Series, Online Manual, Page: 443 / 464

Search results

Summary of Contents for PIXMA TS6200 Series

Reviews: