Canon PIXMA TS6100 series Online Manual Download Page 435

Page: 435 / 435

C000

Cause

Printer error has occurred.

What to Do

Cancel printing and turn off the printer.

Check the following:

• Make sure print head holder motion is not impeded by tapes for securing the print head holder during

transportation, jammed paper, etc.

Remove any impediment.

• Make sure the ink tanks are properly installed.

Press ink tanks until they click into place.

Turn the printer back on.

If this does not solve the problem, contact your nearest Canon service center to request a repair.

Important

• When clearing an impediment to print head holder motion, be careful not to touch white belt (A).

If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.

435

Summary of Contents for PIXMA TS6100 series




















































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TS6100 series

Reviews:

Canon PIXMA TS6100 series, Online Manual, Page: 435 / 435

Search results

Summary of Contents for PIXMA TS6100 series

Reviews: