manualshive.com logo in svg

Canon PIXMA TS5150, Online Manual, Page: 325 / 348

Share
Download
Canon PIXMA TS5150 Online Manual Download Page 325

1000

Cause

Possible causes include the following.

• There is no paper in the rear tray.
• Paper is not loaded in the rear tray properly.

What to Do

Take the corresponding actions below.

• Load paper in the rear tray.
• Align the paper guides with the both edges of the paper when you load paper in the rear tray.
• Set paper information for the paper in the rear tray.

After carrying out the above measures, select 

OK

 on the LCD.

Important

• Be sure to close the feed slot cover after loading paper in the rear tray. If the feed slot cover is open,

paper cannot be fed.

Note

• After loading paper in the rear tray, the screen for setting rear tray paper information appears. Set

paper information for the paper in the rear tray.

• To cancel printing, press the printer's 

Stop

 button.

325

Summary of Contents for PIXMA TS5150





























































































































































































































































































































































Reviews:

No comments