Canon PIXMA TS5000 Series Online Manual Download Page 85

Page: 85 / 441

Cleaning Paper Feed Rollers

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.

In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

1. Make sure that the power is turned on.

2. Select

Setup

on the HOME screen.

LCD and Operation Panel

The setup menu screen will appear.

3. Select

Maintenance

The

Maintenance

screen will appear.

4. Select

Roller cleaning

The confirmation screen will appear.

5. Select

Yes

6. Follow the message to remove any paper from the rear tray.

7. Select

The paper feed roller will rotate as it is cleaned without paper.

8. Make sure that the paper feed roller has stopped rotating, then follow the message to load

three sheets of A4 or Letter-sized plain paper.

9. Open the operation panel, then pull out the paper output tray.

Summary of Contents for PIXMA TS5000 Series


























































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TS5000 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA TS5000 Series, Online Manual

Search results

Summary of Contents for PIXMA TS5000 Series

Reviews:

Brands by name

Popular brands