Canon PIXMA TS5000 Series Online Manual Download Page 432

Page: 432 / 441

2900

Cause

Scanning print head alignment sheet failed.

What to Do

Select

on the LCD and follow the instructions below.

• Make sure the print head alignment sheet is set in the correct position and orientation on the platen

glass.

• Make sure the platen glass and the print head alignment sheet are not dirty.
• Make sure the loaded paper is correct.

For automatic print head alignment, load A4 or Letter-sized plain paper.

• Make sure the print head nozzle is not clogged.

Check the print head condition by printing the nozzle check pattern.

After carrying out the above actions, try manual print head alignment.

432

Summary of Contents for PIXMA TS5000 Series


























































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TS5000 Series

Reviews:

Brands by name

Popular brands

Canon PIXMA TS5000 Series, Online Manual

Search results

Summary of Contents for PIXMA TS5000 Series

Reviews:

Brands by name

Popular brands