manualshive.com logo in svg

Canon PIXMA TS5000 Series, Online Manual

Share
Download
Canon PIXMA TS5000 Series Online Manual Download Page 114

Confirming that the Power Is On

The 

POWER

 lamp is lit when the printer is turned on.

Even if the LCD is off, if the 

POWER

 lamp is lit, the printer is on.

Note

• It may take a while for the printer to start printing immediately after you turn on the printer.
• The LCD will turn off if the printer is not operated for about 10 minutes. To restore the display, press any

button except the 

ON

 button or perform the print operation. You cannot change the wait time before the

LCD turns off.

114

Summary of Contents for PIXMA TS5000 Series


























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands