Canon PIXMA TR8520 Online Manual Download Page 108

Page: 108 / 498

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.

Replace the ink

tank

whose ink is low.

You need to prepare: a sheet of A4 or Letter-sized plain paper

1. Make sure that the power is turned on.

2. Load a sheet of A4 or Letter-sized plain paper in the cassette.

After pushing the cassette back, the paper information registration screen is displayed on the touch
screen. Select

Letter

for

Page size

, then select

Register

If a message is displayed on the screen, follow the directions in the message to complete registration.

Note

• Be sure to load paper in the cassette. Even if you load paper on the rear tray, the nozzle check

pattern is not be printed.

3. Open the operation panel, then pull out the paper output tray.

4. Select

Setup

on the HOME screen.

Using the Operation Panel

The setup menu screen will appear.

5. Select

Maintenance

The

Maintenance

screen will appear.

6. Select

Print nozzle check pattern

108

Summary of Contents for PIXMA TR8520



















































































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TR8520

Reviews:

Brands by name

Popular brands

Canon PIXMA TR8520, Online Manual

Search results

Summary of Contents for PIXMA TR8520

Reviews:

Brands by name

Popular brands