Canon Pixma TR7800 Series, Online Manual

Page: 274 / 554

Settings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape]
check box.
To rotate the document 90 degrees to the left when printing, select the
Rotate 90 degrees left
when orientation is [Landscape] check box.
Rotate 180 degrees
Prints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other application software will
be reversed vertically and horizontally.
Borderless Printing
Chooses whether you are printing on a full page without any page margins or printing with page
margins.
In borderless printing, originals are enlarged to extend slightly off the paper. Thus, printing can be
performed without any margins (border).
Use
Amount of Extension to adjust how much of the document extends off the paper during
borderless printing.
Amount of Extension
Adjusts how much of the document extends off the paper during borderless printing.
Moving the slider to the right increases the amount of extension and allows you to perform
borderless printing with no problems.
Moving the slider to the left reduces the amount of extension and expands the range of the
document to print.
Page Layout
Selects the size of the document you want to print and the type of printing.
1 on 1 to 16 on 1
Multiple pages of document can be printed on one sheet of paper. To change the page order, click
Preferences... . In the Page Layout Printing dialog box that appears, specify Page Order .
Poster (1 x 2) to Poster (4 x 4)
This function enables you to enlarge the image data and divide the enlarged data into several
pages to be printed.
You can also glue together these sheets of paper to create large printed matter, such as a poster.
Preferences...
Opens the Poster Printing dialog box .
Click this button to set details on poster printing.
Zoom
Specifies an enlargement or reduction ratio for the document you want to print.
1-sided/2-sided/Booklet Printing
1-sided Printing
Select when performing single-sided printing.
2-sided Printing
Select when performing duplex printing.
Automatic
Selects whether duplex printing is to be performed automatically or manually.
To perform duplex printing manually, uncheck this check box.
274