Canon Pixma TR7600 Series Online Manual Download Page 354

Page: 354 / 563

Select number to enter.

Enter the date and time in 24-hour format.

Select

again when all settings are completed.

Setting Daylight Saving Time (Summer Time)

Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at
certain periods of the year.

You can set your printer to automatically change the time by registering the date and time that daylight
saving time (summer time) begins and ends.

Important

• Not all the latest information of all countries or regions is applied for

Daylight saving time setting

default. You need to change the default setting according to the latest information of your country or
region.

Note

• This setting may not be available depending on the country or region of purchase.

Check that printer is turned on.

Select

Setup

on the HOME screen.

Using Touch Screen

354

Summary of Contents for Pixma TR7600 Series




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pixma TR7600 Series

Reviews:

Related manuals for Pixma TR7600 Series

Brands by name

Popular brands

Canon Pixma TR7600 Series, Online Manual

Search results

Summary of Contents for Pixma TR7600 Series

Reviews:

Related manuals for Pixma TR7600 Series

Brands by name

Popular brands