manualshive.com logo in svg

Canon Pixma TR7600 Series, Online Manual, Page: 332 / 563

Share
Download
Canon Pixma TR7600 Series Online Manual Download Page 332

Important

• Large items (such as A4 size photos) that cannot be

placed away from the edges/arrow (alignment mark) of
the platen may be saved as PDF files. To save in a for-
mat other than PDF, scan by specifying the data format.

Multiple items:

Allow 0.4 inch (1 cm) or more space between the edges (di-
agonally striped area) of the platen and items, and between
items. Portions placed on the diagonally striped area cannot
be scanned.

 : 0.4 inch (1 cm) or more

Note

• Place up to 12 items.
• Positions of slanted items (10 degrees or less) are cor-

rected automatically.

Important

• For the portions in which items cannot be scan-

ned, see 

Loading Originals

.

Placing Documents (ADF (Auto Document Feeder))

Important

• Place and align documents of the same size when scanning two or more documents.
• For supported document sizes when scanning from the ADF, see 

Supported Originals

.

1.

Make sure any original has been removed from platen.

332

Summary of Contents for Pixma TR7600 Series




















































































































































































































































































































































































































































































































































































Reviews:

No comments