Canon PIXMA TR7022 Online Manual Download Page 301

Page: 301 / 346

What to Do When Paper Is Jammed

If paper jams, remove it following the appropriate procedure as shown below.

• If you can see the jammed paper at the paper output slot or the rear tray:

1300

• If you cannot see the jammed paper at the paper output slot or the rear tray:

◦ If the paper fed from the cassette is jammed:

1303

◦ If the paper is jammed when performing automatic duplex printing:

1304

◦ If the paper is jammed as the printer pulled in the printed paper:

1313

◦ If the paper tears and you cannot remove it from the paper output slot or if the paper is jammed

inside the printer:

Paper Is Jammed inside Printer

• If the document is jammed in the ADF (Auto Document Feeder):

2801

• Cases other than above:

Other Cases

301

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Search results

Summary of Contents for PIXMA TR7022

Reviews:

Canon PIXMA TR7022, Online Manual, Page: 301 / 346

Search results

Summary of Contents for PIXMA TR7022

Reviews: