manualshive.com logo in svg

Canon PIXMA TR7022, Online Manual, Page: 274 / 346

Share
Download
Canon PIXMA TR7022 Online Manual Download Page 274

Paper Is Smudged / Printed Surface Is Scratched

 Paper Is Smudged

Smudged Edges

Smudged Surface

 Printed Surface Is Scratched

Check1

 Check paper and print quality settings.

Printout Results Are Unsatisfactory

Check2

 Check paper type.

Make sure you are using the right paper for what you are printing.

Supported Media Types

Check3

 Correct curl before loading paper.

When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is. Rolling
this paper in the opposite direction to flatten it may crack the paper surface and reduce the print quality.

We recommend putting unused paper back into the package and storing it flat.

•

Plain Paper

Turn the paper over and reload it to print on the other side.

•

Other Paper such as envelope

If the paper corners curl more than 0.1 in. / 3 mm (A) in height, the paper may smudge or may not feed
properly. Follow the instructions below to correct the paper curl.

274

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Reviews:

No comments