Canon PIXMA TR7022 Online Manual Download Page 207

Page: 207 / 346

Making Copies

This section describes the basic procedure to perform standard copying.

Check that printer is turned on.

Load paper.

Load original document on platen or in ADF (Auto Document Feeder).

Confirm the page size and color mode.

Note

• To change the paper position, color mode and other settings, press the

button. Select

Copy

settings

to display the desired setting item.

Setting Items for Copying

Use the button to specify the number of copies.

Note

• You can specify the number of copies even if you select

Copies

from

Copy settings

Press the

Start

button.

The printer starts copying.

Remove the original on the platen after copying is complete.

Important

• Do not open the document cover or remove the original while

Copying...

is displayed on the

screen.

• If you load the original in the ADF, do not move the original until copying is complete.

Note

• To cancel copying, press the

Stop

button.

207

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Search results

Summary of Contents for PIXMA TR7022

Reviews:

Canon PIXMA TR7022, Online Manual, Page: 207 / 346

Search results

Summary of Contents for PIXMA TR7022

Reviews: