Canon PIXMA TR7022 Online Manual Download Page 112

Page: 112 / 346

Cleaning Paper Feed Rollers

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.

In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.

You need to prepare: three sheets of A4 or Letter-sized plain paper

Check that printer is turned on.

Press the

button.

Select

Maintenance

Select

Roller cleaning

The confirmation screen will appear.

Select

Yes

Select

Rear tray

Cassette

to clean the paper feed roller.

Follow the message to remove any paper from the paper source.

If you clean the paper feed roller of cassette, remove any paper from the cassette, then push it back.

Press the

button.

The paper feed roller will rotate as it is cleaned without paper.

Make sure that the paper feed roller has stopped rotating, then follow the message to load
the three sheets of A4 or Letter-sized plain paper.

Loading Plain Paper / Photo Paper in Rear Tray
Loading Plain Paper in Cassette

10.

Press the

button.

112

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Search results

Summary of Contents for PIXMA TR7022

Reviews:

Canon PIXMA TR7022, Online Manual, Page: 112 / 346

Search results

Summary of Contents for PIXMA TR7022

Reviews: