Canon PIXMA TR4550, Online Manual

Page: 308 / 571

Adding the Copying Job (Reserve copy)
If you load the original on the platen, you can add the copying job while printing (Reserve copy).
The screen like shown below is displayed when you can reserve copy.
Load the original on the platen and press the same button (the Color button or the Black button) as the
one which you previously pressed.
Important
• When you load the original on the platen, open and close the document cover gently.
Note
• When Print quality is set High , or you load the original in the ADF, you cannot add the copying job.
• When you add the copying job, the number of copies or the settings such as the page size or media
type cannot be changed.
• If you press the Stop button while reserve copying is in progress, the screen to select the method to
cancel copying is displayed. If you select Cancel all reserv. then press the OK button, you can
cancel copying all scanned data. If you select Cancel last reserv. then press the OK button, you can
cancel the last copying job.
• If you set a document of too many pages to reserve copy, Memory is full may appear on the LCD.
Press the OK button and wait a while, then try copying again.
• If Try again appears on the LCD when scanning, press the OK button, then press the Stop button to
cancel copying. After that, copy the documents that have not been finished copying.
308