manualshive.com logo in svg

Canon Pixma PRO-100S series, Online Manual, Page: 163 / 617

Share
Download
Canon Pixma PRO-100S series Online Manual Download Page 163

Aligning the Print Head Position from Your Computer

Print head alignment corrects the installation positions of the print head and improves deviated colors and
lines.

This printer supports two head alignment methods: automatic head alignment and manual head alignment.
Normally, the printer is set for automatic head alignment.
If the printing results of automatic print head alignment are not satisfactory, 

perform manual head alignment

.

The procedure for performing automatic print head alignment is as follows:

Note

• If the disc tray guide is open, close it.

 Print Head Alignment

1. Open the 

printer driver setup window

2. Click 

Print Head Alignment

 on the 

Maintenance

 tab

The 

Start Print Head Alignment

 dialog box opens.

3. Load paper in the printer

Load two sheets of A4 size or Letter size plain paper into the rear tray.

Note

• Depending on the condition of the printer, you may need to use 3 sheets of A4 size or Letter

size plain paper.

• The number of sheets to be used differs when you select the manual head alignment.

4. Execute head alignment

Make sure that the printer is on and click 

Align Print Head

.

Follow the instruction in the message.

Important

• Do not open the top cover while printing is in progress.

Note

• Wait until printing ends before performing other operations. Printing takes about 5 minutes to

complete.

Note

• To print and check the current setting, open the 

Start Print Head Alignment

 dialog box, and click

Print Alignment Value

.

163

Summary of Contents for Pixma PRO-100S series










































































































































































































































































































































































































































































































































































































































Reviews:

No comments