Canon Pixma PRO-100S series Online Manual Download Page 134 | Manualshive

Page: 134 / 617

background image

Cautions When Printing on a Printable Disc

• Be sure to use the disc tray supplied with this printer. It has a "K" on the upper side.
• Do not print on printable discs that are not compatible with inkjet printing. The ink will not dry and may

cause problems with the disc itself or devices which the disc is loaded onto.

• Do not print on the printable discs' recording surface. Doing so will make data recorded on discs

unreadable.

• Hold the printable discs by their edges. Do not touch either the label surface (printing surface) or

recording surface.

• Remove any dirt from the disc tray before placing printable discs on the disc tray. Loading discs in a

dirty disc tray may scratch the recording surface of the discs.

• After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or expose the

disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has dried.

• Do not attach the disc tray while the printer is in operation.
• Do not remove the disc tray while printing on printable discs. Doing so may damage the printer, the disc

tray, or the disc.

• Do not get dirt or scratches on the reflectors of the disc tray. The printer may not be able to recognize

loading of the printable disc, or printing may become misaligned. If the reflectors on the disc tray
become dirty, wipe the reflector clean with a soft and dry cloth, taking care not to scratch the plate.

• The disc tray may become dirty if software other than My Image Garden is used.
• Always close the disc tray guide after printing on printable discs.

134

«
...
132
133
134
135
136
...
»

Summary of Contents for Pixma PRO-100S series










































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Pixma PRO-100S series

Brand: Xerox Pages: 34

Brand: Canon Pages: 18

Brand: Canon Pages: 16

Brand: Canon Pages: 39

Brand: Canon Pages: 2

Brand: Canon Pages: 73

Brand: Canon Pages: 29

Brand: Canon Pages: 16

Brand: Canon Pages: 44

Brand: Canon Pages: 60

Brand: Olympus Pages: 236

I450 - i 450 Color Inkjet Printer

Brand: Canon Pages: 13

Brand: Canon Pages: 86

Brand: Canon Pages: 20

Brand: Oki Pages: 98

Brand: FujiFilm Pages: 34

Brand: Oki Pages: 44

8437477 - EasyShare ESP 9 All-In-One Printer

Brand: Kodak Pages: 143

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands