Canon PIXMA MX394, Online Manual, Page: 33 / 127

Entering Numbers, Letters, and Symbols
The machine allows you to enter characters using the Numeric buttons when entering information, such as unit name, a
recipient's name for memory dial, etc.
Switching the Input Mode
The machine has three input modes: lowercase mode, uppercase mode, and numeric mode. You can use the Numeric
buttons to enter characters in each input mode.
Each time the
Tone button is pressed, the input mode is switched in the following order: lowercase mode ( :a ), uppercase
mode ( :A ), then numeric mode ( :1 ).
The current input mode appears at the upper right corner of the LCD.
Note
Here describes the procedure to enter the unit name as example.
"Registering User Information" in Setting the Sender Information
Entering Numbers, Letters, and Symbols
Press the Tone button to switch the input mode.
Use the Numeric buttons to enter the desired characters.
To enter a space, press the button three times.
To delete the last entered character, press the Back button.
Editing Entered Numbers, Letters, and Symbols
Press the or button to move the cursor under the position you want to edit.
To insert a space
Press the button three times.
To insert a character
Move the cursor under the character to the right of the insertion position, then enter the character. The character on
the cursor will move to the right and the new character will be inserted.
To delete a character
Move the cursor under the character, then press the Back button.
List of Characters Assigned to Each Numeric Button
Button
Lowercase mode
(
:a
)
Uppercase mode
(
:A
)
Numeric mode
(
:1
)
Fax/Telephone no.
1 1
abcåäáàãâæç ABCÅÄÁÀÃÂÆÇ 2 2
defëéèê DEFËÉÈÊ 3 3
gh i ï í ì î GH I Ï Í Ì Î 4 4
jkl JKL 5 5
mnoñøöóòõô MNOÑØÖÓÒÕÔ 6 6
pqrsþ PQRSÞ 7 7
33