Front View
(1)
operation panel
Use to change the settings of the machine or to operate it.
(2)
ADF (Auto Document Feeder)
Load a document to copy, scan, or fax. The documents loaded in the document tray are scanned automatically
one sheet at a time.
Loading Documents in the ADF (Auto Document Feeder)
(3)
document feeder cover
Open when clearing jammed documents.
(4)
document guides
Adjust these guides to match the width of document in the ADF.
(5)
document tray
Open to load a document in the ADF. You can load two or more sheets of document of the same size and
thickness. Load the document with the side you want to scan facing up.
(6)
document output slot
Documents scanned from the ADF are delivered here.
(7)
document cover
Open to load an original on the platen glass.
(8)
paper output cover
Open to replace the FINE cartridge or remove jammed paper inside the machine.
(9)
paper guides
Slide to align with both sides of the paper stack.
(10)
front tray
Load various sizes or types of paper which you can use on the machine. Two or more sheets of the same size
and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
Loading Plain Paper / Photo Paper
Loading Envelopes
(11)
front cover
Open to load paper in the front tray.
(12)
paper support
20
Summary of Contents for PIXMA MX394
