Canon PIXMA mini 260 Photo Printing Manual Download Page 61

Page: 61 / 92

Troubleshooting

Note

Adjusting the Print Head Manually

If the Automatic Print Head Alignment does not work or if you wish to adjust the print heads manually,

follow the procedure below.

1. Press the

ON/OFF

button to turn on the printer, and then load two sheets of supplied paper or

Canon genuine 4" x 6"/101.6 x 152.4 mm paper* in the Auto Sheet Feeder.
* Use the following papers.

Matte Photo Paper

Photo Paper Pro

Photo Paper Plus Glossy

2. Press the

HOME

button.

3. Select

Settings

and then press the

button.

4. Select

Maintenance

and then press the

button.

5. Select

Manual head align

and press the

button.

6. Select

Yes

and then press the

button.

The Print Head alignment pattern is printed.

7. When

“Did the patterns print correctly?”

is displayed, confirm that the pattern is printed

correctly, select

Yes

, and then press the

button.

8. Check the printed patterns and use the

to input the number of the pattern in columns

A to D that has the least noticeable streaks, and then press the

button.

9. Make sure that paper is loaded, and then click the

button.

The second sheet of the Print Head alignment sheet is printed.

10.In the same way, select the best patterns for columns E and F, and then click the

button.

When you turn off the printer, be sure to press the

ON/OFF

button on the printer. Otherwise, the settings

made here will not be saved.

Summary of Contents for PIXMA mini 260





























































































Search results

Summary of Contents for PIXMA mini 260

Reviews:

Related manuals for PIXMA mini 260

Brands by name

Popular brands

Canon PIXMA mini 260, Photo Printing Manual

Search results

Summary of Contents for PIXMA mini 260

Reviews:

Related manuals for PIXMA mini 260

Brands by name

Popular brands